Marine coatings
Intersmooth 7476Si SPC – ME, SEA, N.Asia Tin-free self-polishing copolymer antifouling
Home | All models | Marine coatings | Intersmooth 7476Si SPC – ME, SEA, N.Asia
Intersmooth 7476Si SPC – ME, SEA, N.Asia Tin-free self-polishing copolymer antifouling is supplied under the International Paint brand. It sits in the Marine coatings range. It provides antifouling protection. Technical data list: DFT 170 µm · spreading rate 7.47-4.48 m²/L · solids 56% ± 2%. At 25 °C it is 30 min touch dry.
Basic data
- Model
- Intersmooth 7476Si SPC – ME, SEA, N.Asia (Tin-free self-polishing copolymer antifouling)
- Product type
- Tin-free self-polishing copolymer antifouling
- Category
- Marine coatings
- Volume solids
- 56% ± 2%
- Theoretical spreading rate
- 7.47-4.48 m²/L
- Recommended dry film thickness
- 170 µm
- Drying (25°C substrate temperature)
- Touch dry 30 min
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intersmooth 7476Si SPC – ME, SEA, N.Asia (Tin-free self-polishing copolymer antifouling) data sheet; other conditions are not listed.
- Other parameters
- For Intersmooth 7476Si SPC – ME, SEA, N.Asia, thinning and pack sizes are as stated in the technical data.
Consumption calculation
Theoretical consumption is 0.134 L/m² for Intersmooth 7476Si SPC – ME, SEA, N.Asia, excluding application losses. That is about 13.4 L per 100 m². At a wet film of 304 µm. All figures are calculated.
System and application
The substrate condition for Intersmooth 7476Si SPC – ME, SEA, N.Asia has to be checked before application. Its mixing ratio and pot life are specified in the technical data sheet.
Selection and consumption for Intersmooth 7476Si SPC – ME, SEA, N.Asia are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intersmooth 7476Si SPC – ME, SEA, N.Asia Tin-free self-polishing copolymer antifouling”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intersmooth 7476Si SPC – ME,
- System selection for Intersmooth 7476Si SPC – ME,: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intersmooth 7476Si SPC – ME,: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intersmooth 7476Si SPC – ME,: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

