Marine coatings
Interbond 201 - Low Temperature Epoxy primer / topcoat
Home | All models | Marine coatings | Interbond 201 - Low Temperature
Interbond 201 - Low Temperature Epoxy primer / topcoat is supplied under the International Paint brand. It is catalogued under Marine coatings. The data sheet gives: spreading rate 4.93 m²/L, solids 74% ± 2%, DFT 150 µm. At 25 °C it is 3 h touch dry and 10 h hard dry.
Basic data
- Model
- Interbond 201 - Low Temperature
- Product type
- Epoxy primer / topcoat
- Category
- Marine coatings
- Volume solids
- 74% ± 2%
- Theoretical spreading rate
- 4.93 m²/L
- Recommended dry film thickness
- 150 µm
- Drying (25°C substrate temperature)
- Touch dry 3 h / Hard dry 10 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interbond 201 - Low Temperature data sheet; other conditions are not listed.
- Other parameters
- For Interbond 201 - Low Temperature, the technical data sheet covers mixing, thinning and pack sizes.
Consumption calculation
Consumption is 0.203 L/m² for Interbond 201 - Low Temperature, excluding application losses. That is about 20.3 L per 100 m². At a wet film of 203 µm. The values above are calculated.
System and application
The substrate condition for Interbond 201 - Low Temperature has to be checked before application. Its mixing ratio and pot life are set out in the technical data.
Selection and consumption for Interbond 201 - Low Temperature are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interbond 201 - Low Temperature Epoxy primer / topcoat”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interbond 201 - Low
- System selection for Interbond 201 - Low: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interbond 201 - Low: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interbond 201 - Low: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

