Marine coatings
Interbond 808 Epoxy anti-corrosive coating
Home | All models | Marine coatings | Interbond 808
Interbond 808 Epoxy anti-corrosive coating is supplied under the International Paint brand for primer use. It sits in the Marine coatings range. Technical data list: solids 82% ± 2%, spreading rate 2.73 m²/L, DFT 300 µm. Drying at 25 °C: 3.5 h touch dry, 7 h hard dry.
Basic data
- Model
- Interbond 808 (Epoxy anti-corrosive coating)
- Product type
- Epoxy anti-corrosive coating
- Category
- Marine coatings
- Volume solids
- 82% ± 2%
- Theoretical spreading rate
- 2.73 m²/L
- Recommended dry film thickness
- 300 µm
- Drying (25°C substrate temperature)
- Touch dry 3.5 h / Hard dry 7 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interbond 808 (Epoxy anti-corrosive coating) data sheet; other conditions are not listed.
- Other parameters
- For Interbond 808, thinning and pack sizes are as stated in the technical data.
Consumption calculation
Theoretical consumption is 0.366 L/m² for Interbond 808, excluding application losses. That is about 36.6 L per 100 m². At a wet film of 366 µm. All figures are calculated.
System and application
Interbond 808 as a primer, Surface preparation comes first. Its mixing ratio and pot life are specified in the technical data sheet.
TDS and SDS for Interbond 808 are available on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interbond 808 Epoxy anti-corrosive coating”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interbond 808
- System selection for Interbond 808: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interbond 808: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interbond 808: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

