Intergard 361 Epoxy coating is supplied under the International Paint brand. It belongs to the Marine coatings range. Published figures are: spreading rate 6.5 m²/L, DFT 100 µm, solids 65% ± 2%. At 25 °C it is 4 h touch dry and 9 h hard dry.
Basic data
- Model
- Intergard 361 (Epoxy coating)
- Product type
- Epoxy coating
- Category
- Marine coatings
- Volume solids
- 65% ± 2%
- Theoretical spreading rate
- 6.5 m²/L
- Recommended dry film thickness
- 100 µm
- Drying (25°C substrate temperature)
- Touch dry 4 h / Hard dry 9 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intergard 361 (Epoxy coating) data sheet; other conditions are not listed.
- Other parameters
- For Intergard 361, mixing, thinning and pack sizes are given in the technical data sheet.
Consumption calculation
Coverage works out at 0.154 L/m² for Intergard 361, excluding application losses. That is about 15.4 L per 100 m². At a wet film of 154 µm. These are theoretical values.
System and application
The substrate condition for Intergard 361 has to be checked before application. Its mixing ratio and pot life follow that data sheet.
Selection and consumption for Intergard 361 are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intergard 361 Epoxy coating”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intergard 361 Epoxy coating
- System selection for Intergard 361 Epoxy coating: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intergard 361 Epoxy coating: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intergard 361 Epoxy coating: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

