Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Marine coatings

Interbond 201 - Temperate Epoxy primer

Home | All models | Marine coatings | Interbond 201 - Temperate

Interbond 201 - Temperate Epoxy primer is supplied under the International Paint brand for primer use. It sits in the Marine coatings range. Technical data list: DFT 150 µm, spreading rate 4.93 m²/L, solids 74% ± 2%. At 25 °C it is 4 h touch dry and 9 h hard dry.

Marine coatingsPrimerEpoxy

Basic data

Model
Interbond 201 - Temperate (Epoxy primer)
Product type
Epoxy primer
Category
Marine coatings
Volume solids
74% ± 2%
Theoretical spreading rate
4.93 m²/L
Recommended dry film thickness
150 µm
Drying (25°C substrate temperature)
Touch dry 4 h / Hard dry 9 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Interbond 201 - Temperate (Epoxy primer) data sheet; other conditions are not listed.
Other parameters
For Interbond 201 - Temperate, thinning and pack sizes are as stated in the technical data.

Consumption calculation

Theoretical consumption is 0.203 L/m² for Interbond 201 - Temperate, excluding application losses. That is about 20.3 L per 100 m². At a wet film of 203 µm. All figures are calculated.

System and application

Interbond 201 - Temperate is applied as a primer. Surface preparation is the critical step. Its mixing ratio and pot life are specified in the technical data sheet.

Technical data for Interbond 201 - Temperate can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interbond 201 - Temperate Epoxy primer”; parameters not listed here are governed by that data sheet.

Enquiries on Interbond 201 - Temperate

  • System selection for Interbond 201 - Temperate: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Interbond 201 - Temperate: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Interbond 201 - Temperate: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.