Marine coatings / Industrial coatings
Intergard 5600 Epoxy general-purpose primer
Home | All models | Marine coatings | Intergard 5600
Intergard 5600 Epoxy general-purpose primer is supplied under the International Paint brand for primer use. It is catalogued under Marine coatings. The data sheet gives: DFT 160 µm · solids 68% ± 2% · spreading rate 4.25 m²/L. Drying at 25 °C: 9 h touch dry, 12 h hard dry. Intergard 5600 has applications in both sectors.
Basic data
- Model
- Intergard 5600 (Epoxy general-purpose primer)
- Product type
- Epoxy general-purpose primer
- Category
- Marine coatings / Industrial coatings
- Volume solids
- 68% ± 2%
- Theoretical spreading rate
- 4.25 m²/L
- Recommended dry film thickness
- 160 µm
- Drying (25°C substrate temperature)
- Touch dry 9 h / Hard dry 12 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intergard 5600 (Epoxy general-purpose primer) data sheet; other conditions are not listed.
- Other parameters
- For Intergard 5600, the technical data sheet covers mixing, thinning and pack sizes.
Consumption calculation
Consumption is 0.235 L/m² for Intergard 5600, excluding application losses. That is about 23.5 L per 100 m². At a wet film of 235 µm. The values above are calculated.
System and application
Intergard 5600 as a primer, Surface preparation comes first. Its mixing ratio and pot life are set out in the technical data.
Consumption for Intergard 5600 is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intergard 5600 Epoxy general-purpose primer”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intergard 5600
- System selection for Intergard 5600: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intergard 5600: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intergard 5600: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

