Marine coatings
Intersmooth 7475Si SPC Tin-free self-polishing copolymer antifouling
Home | All models | Marine coatings | Intersmooth 7475Si SPC
Intersmooth 7475Si SPC Tin-free self-polishing copolymer antifouling is supplied under the International Paint brand. It is catalogued under Marine coatings. It provides antifouling protection. The data sheet gives: spreading rate 7.5-3.7 m²/L · solids 56% ± 2% · DFT 150 µm. At 25 °C it is 60 min touch dry.
Basic data
- Model
- Intersmooth 7475Si SPC (Tin-free self-polishing copolymer antifouling)
- Product type
- Tin-free self-polishing copolymer antifouling
- Category
- Marine coatings
- Volume solids
- 56% ± 2%
- Theoretical spreading rate
- 7.5-3.7 m²/L
- Recommended dry film thickness
- 150 µm
- Drying (25°C substrate temperature)
- Touch dry 60 min
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intersmooth 7475Si SPC (Tin-free self-polishing copolymer antifouling) data sheet; other conditions are not listed.
- Other parameters
- For Intersmooth 7475Si SPC, the technical data sheet covers mixing, thinning and pack sizes.
Consumption calculation
Consumption is 0.133 L/m² for Intersmooth 7475Si SPC, excluding application losses. That is about 13.3 L per 100 m². At a wet film of 268 µm. The values above are calculated.
System and application
The substrate condition for Intersmooth 7475Si SPC has to be checked before application. Its mixing ratio and pot life are set out in the technical data.
Selection and consumption for Intersmooth 7475Si SPC are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intersmooth 7475Si SPC Tin-free self-polishing copolymer antifouling”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intersmooth 7475Si SPC
- System selection for Intersmooth 7475Si SPC: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intersmooth 7475Si SPC: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intersmooth 7475Si SPC: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

