Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Marine coatings

Intersmooth 7465Si SPC Tin-free self-polishing copolymer antifouling

Home | All models | Marine coatings | Intersmooth 7465Si SPC

Intersmooth 7465Si SPC Tin-free self-polishing copolymer antifouling is supplied under the International Paint brand. It belongs to the Marine coatings range. Its function is antifouling protection. Published figures are: solids 55% ± 2% · DFT 150 µm · spreading rate 3.6 m²/L. Drying at 25 °C: 40 min touch dry.

Marine coatingsAntifouling

Basic data

Model
Intersmooth 7465Si SPC (Tin-free self-polishing copolymer antifouling)
Product type
Tin-free self-polishing copolymer antifouling
Category
Marine coatings
Volume solids
55% ± 2%
Theoretical spreading rate
3.6 m²/L
Recommended dry film thickness
150 µm
Drying (25°C substrate temperature)
Touch dry 40 min
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Intersmooth 7465Si SPC (Tin-free self-polishing copolymer antifouling) data sheet; other conditions are not listed.
Other parameters
For Intersmooth 7465Si SPC, mixing, thinning and pack sizes are given in the technical data sheet.

Consumption calculation

Coverage works out at 0.278 L/m² for Intersmooth 7465Si SPC, excluding application losses. That is about 27.8 L per 100 m². At a wet film of 273 µm. These are theoretical values.

System and application

For Intersmooth 7465Si SPC, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life follow that data sheet.

TDS and SDS for Intersmooth 7465Si SPC are available on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intersmooth 7465Si SPC Tin-free self-polishing copolymer antifouling”; parameters not listed here are governed by that data sheet.

Enquiries on Intersmooth 7465Si SPC

  • System selection for Intersmooth 7465Si SPC: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Intersmooth 7465Si SPC: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Intersmooth 7465Si SPC: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.