Marine coatings
Intersmooth 7200Si SPC Tin-free self-polishing copolymer antifouling
Home | All models | Marine coatings | Intersmooth 7200Si SPC
Intersmooth 7200Si SPC Tin-free self-polishing copolymer antifouling is supplied under the International Paint brand. It sits in the Marine coatings range. It provides antifouling protection. Technical data list: DFT 200 µm · spreading rate 8.1-3.0 m²/L · solids 61% ± 2%. At 25 °C it is 1.5 h touch dry.
Basic data
- Model
- Intersmooth 7200Si SPC (Tin-free self-polishing copolymer antifouling)
- Product type
- Tin-free self-polishing copolymer antifouling
- Category
- Marine coatings
- Volume solids
- 61% ± 2%
- Theoretical spreading rate
- 8.1-3.0 m²/L
- Recommended dry film thickness
- 200 µm
- Drying (25°C substrate temperature)
- Touch dry 1.5 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intersmooth 7200Si SPC (Tin-free self-polishing copolymer antifouling) data sheet; other conditions are not listed.
- Other parameters
- For Intersmooth 7200Si SPC, thinning and pack sizes are as stated in the technical data.
Consumption calculation
Theoretical consumption is 0.123 L/m² for Intersmooth 7200Si SPC, excluding application losses. That is about 12.3 L per 100 m². At a wet film of 328 µm. All figures are calculated.
System and application
The substrate condition for Intersmooth 7200Si SPC has to be checked before application. Its mixing ratio and pot life are specified in the technical data sheet.
Technical data for Intersmooth 7200Si SPC can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intersmooth 7200Si SPC Tin-free self-polishing copolymer antifouling”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intersmooth 7200Si SPC
- System selection for Intersmooth 7200Si SPC: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intersmooth 7200Si SPC: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intersmooth 7200Si SPC: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

