Marine coatings
Intersmooth 360 SPC Self-polishing copolymer (SPC) antifouling system
Home | All models | Marine coatings | Intersmooth 360 SPC
Intersmooth 360 SPC Self-polishing copolymer (SPC) antifouling system is supplied under the International Paint brand. It is catalogued under Marine coatings. It provides antifouling protection. The data sheet gives: spreading rate 5.7-2.9 m²/L · solids 40% ± 2% · DFT 140 µm. At 25 °C it is 40 min touch dry.
Basic data
- Model
- Intersmooth 360 SPC
- Product type
- Self-polishing copolymer (SPC) antifouling system
- Category
- Marine coatings
- Volume solids
- 40% ± 2%
- Theoretical spreading rate
- 5.7-2.9 m²/L
- Recommended dry film thickness
- 140 µm
- Drying (25°C substrate temperature)
- Touch dry 40 min
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intersmooth 360 SPC data sheet; other conditions are not listed.
- Other parameters
- For Intersmooth 360 SPC, the technical data sheet covers mixing, thinning and pack sizes.
Consumption calculation
Consumption is 0.175 L/m² for Intersmooth 360 SPC, excluding application losses. That is about 17.5 L per 100 m². At a wet film of 350 µm. The values above are calculated.
System and application
The substrate condition for Intersmooth 360 SPC has to be checked before application. Its mixing ratio and pot life are set out in the technical data.
Technical data for Intersmooth 360 SPC can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intersmooth 360 SPC Self-polishing copolymer (SPC) antifouling system”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intersmooth 360 SPC
- System selection for Intersmooth 360 SPC: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intersmooth 360 SPC: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intersmooth 360 SPC: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

