Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Marine coatings

Intersleek 737 Elastomeric fouling-release transition coating

Home | All models | Marine coatings | Intersleek 737

Intersleek 737 Elastomeric fouling-release transition coating is supplied under the International Paint brand. It sits in the Marine coatings range. Its function is antifouling protection. Technical data list: solids 57% ± 2%, spreading rate 5.7 m²/L, DFT 100 µm. Drying at 25 °C: 2 h touch dry, 5 h hard dry.

Marine coatingsAntifouling

Basic data

Model
Intersleek 737 (Elastomeric fouling-release transition coating)
Product type
Elastomeric fouling-release transition coating
Category
Marine coatings
Volume solids
57% ± 2%
Theoretical spreading rate
5.7 m²/L
Recommended dry film thickness
100 µm
Drying (25°C substrate temperature)
Touch dry 2 h / Hard dry 5 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Intersleek 737 (Elastomeric fouling-release transition coating) data sheet; other conditions are not listed.
Other parameters
For Intersleek 737, thinning and pack sizes are as stated in the technical data.

Consumption calculation

Theoretical consumption is 0.175 L/m² for Intersleek 737, excluding application losses. That is about 17.5 L per 100 m². At a wet film of 175 µm. All figures are calculated.

System and application

For Intersleek 737, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life are specified in the technical data sheet.

Consumption for Intersleek 737 is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intersleek 737 Elastomeric fouling-release transition coating”; parameters not listed here are governed by that data sheet.

Enquiries on Intersleek 737

  • System selection for Intersleek 737: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Intersleek 737: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Intersleek 737: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.