Marine coatings
Intersleek 731 Silicone elastomer transition coating
Home | All models | Marine coatings | Intersleek 731
Intersleek 731 Silicone elastomer transition coating is supplied under the International Paint brand. It sits in the Marine coatings range. Its function is antifouling protection. Technical data list: solids 63% ± 2% · spreading rate 6.3 m²/L · DFT 100 µm. Drying at 25 °C: 90 min touch dry, 4 h hard dry.
Basic data
- Model
- Intersleek 731
- Product type
- Silicone elastomer transition coating
- Category
- Marine coatings
- Volume solids
- 63% ± 2%
- Theoretical spreading rate
- 6.3 m²/L
- Recommended dry film thickness
- 100 µm
- Drying (25°C substrate temperature)
- Touch dry 90 min / Hard dry 4 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intersleek 731 data sheet; other conditions are not listed.
- Other parameters
- For Intersleek 731, thinning and pack sizes are as stated in the technical data.
Consumption calculation
Theoretical consumption is 0.159 L/m² for Intersleek 731, excluding application losses. That is about 15.9 L per 100 m². At a wet film of 159 µm. All figures are calculated.
System and application
For Intersleek 731, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life are specified in the technical data sheet.
TDS and SDS for Intersleek 731 are available on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intersleek 731 Silicone elastomer transition coating”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intersleek 731
- System selection for Intersleek 731: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intersleek 731: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intersleek 731: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

