Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Marine coatings

Intersleek 7180 Fouling-release tie coat

Home | All models | Marine coatings | Intersleek 7180

Intersleek 7180 Fouling-release tie coat is supplied under the International Paint brand. It is catalogued under Marine coatings. It provides antifouling protection. The data sheet gives: spreading rate 5.60 m²/L · solids 56% ± 2% · DFT 100 µm. At 25 °C it is 3 h touch dry and 9 h hard dry.

Marine coatingsAntifouling

Basic data

Model
Intersleek 7180 (Fouling-release tie coat)
Product type
Fouling-release tie coat
Category
Marine coatings
Volume solids
56% ± 2%
Theoretical spreading rate
5.60 m²/L
Recommended dry film thickness
100 µm
Drying (25°C substrate temperature)
Touch dry 3 h / Hard dry 9 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Intersleek 7180 (Fouling-release tie coat) data sheet; other conditions are not listed.
Other parameters
For Intersleek 7180, the technical data sheet covers mixing, thinning and pack sizes.

Consumption calculation

Consumption is 0.179 L/m² for Intersleek 7180, excluding application losses. That is about 17.9 L per 100 m². At a wet film of 179 µm. The values above are calculated.

System and application

The substrate condition for Intersleek 7180 has to be checked before application. Its mixing ratio and pot life are set out in the technical data.

Selection and consumption for Intersleek 7180 are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intersleek 7180 Fouling-release tie coat”; parameters not listed here are governed by that data sheet.

Enquiries on Intersleek 7180

  • System selection for Intersleek 7180: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Intersleek 7180: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Intersleek 7180: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.