Marine coatings
Intershield 852 Epoxy non-slip topcoat
Home | All models | Marine coatings | Intershield 852
Intershield 852 Epoxy non-slip topcoat is supplied under the International Paint brand. It sits in the Marine coatings range. Technical data list: DFT 1000 µm, spreading rate 0.75 m²/L, solids 75% ± 2%. At 25 °C it is 5 h touch dry and 16 h hard dry.
Basic data
- Model
- Intershield 852
- Product type
- Epoxy non-slip topcoat
- Category
- Marine coatings
- Volume solids
- 75% ± 2%
- Theoretical spreading rate
- 0.75 m²/L
- Recommended dry film thickness
- 1000 µm
- Drying (25°C substrate temperature)
- Touch dry 5 h / Hard dry 16 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intershield 852 data sheet; other conditions are not listed.
- Other parameters
- For Intershield 852, thinning and pack sizes are as stated in the technical data.
Consumption calculation
Theoretical consumption is 1.333 L/m² for Intershield 852, excluding application losses. That is about 133.3 L per 100 m². At a wet film of 1333 µm. All figures are calculated.
System and application
The substrate condition for Intershield 852 has to be checked before application. Its mixing ratio and pot life are specified in the technical data sheet.
Selection and consumption for Intershield 852 are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intershield 852 Epoxy non-slip topcoat”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intershield 852 Epoxy
- System selection for Intershield 852 Epoxy: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intershield 852 Epoxy: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intershield 852 Epoxy: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

