Marine coatings
Intershield 803Plus Abrasion-resistant epoxy coating
Home | All models | Marine coatings | Intershield 803Plus
Intershield 803Plus Abrasion-resistant epoxy coating is supplied under the International Paint brand. It belongs to the Marine coatings range. Published figures are: spreading rate 6 m²/L, DFT 125 µm, solids 75% ± 2%. At 25 °C it is 3 h touch dry and 6 h hard dry.
Basic data
- Model
- Intershield 803Plus (Abrasion-resistant epoxy coating)
- Product type
- Abrasion-resistant epoxy coating
- Category
- Marine coatings
- Volume solids
- 75% ± 2%
- Theoretical spreading rate
- 6 m²/L
- Recommended dry film thickness
- 125 µm
- Drying (25°C substrate temperature)
- Touch dry 3 h / Hard dry 6 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intershield 803Plus (Abrasion-resistant epoxy coating) data sheet; other conditions are not listed.
- Other parameters
- For Intershield 803Plus, mixing, thinning and pack sizes are given in the technical data sheet.
Consumption calculation
Coverage works out at 0.167 L/m² for Intershield 803Plus, excluding application losses. That is about 16.7 L per 100 m². At a wet film of 167 µm. These are theoretical values.
System and application
The substrate condition for Intershield 803Plus has to be checked before application. Its mixing ratio and pot life follow that data sheet.
Selection and consumption for Intershield 803Plus are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intershield 803Plus Abrasion-resistant epoxy coating”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intershield 803Plus
- System selection for Intershield 803Plus: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intershield 803Plus: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intershield 803Plus: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

