Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Marine coatings

Intershield 803 Abrasion-resistant epoxy coating

Home | All models | Marine coatings | Intershield 803

Intershield 803 Abrasion-resistant epoxy coating is supplied under the International Paint brand. It is catalogued under Marine coatings. The data sheet gives: spreading rate 6 m²/L, solids 75% ± 2%, DFT 125 µm. At 25 °C it is 3 h touch dry and 6 h hard dry.

Basic data

Model
Intershield 803 (Abrasion-resistant epoxy coating)
Product type
Abrasion-resistant epoxy coating
Category
Marine coatings
Volume solids
75% ± 2%
Theoretical spreading rate
6 m²/L
Recommended dry film thickness
125 µm
Drying (25°C substrate temperature)
Touch dry 3 h / Hard dry 6 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Intershield 803 (Abrasion-resistant epoxy coating) data sheet; other conditions are not listed.
Other parameters
For Intershield 803, the technical data sheet covers mixing, thinning and pack sizes.

Consumption calculation

Consumption is 0.167 L/m² for Intershield 803, excluding application losses. That is about 16.7 L per 100 m². At a wet film of 167 µm. The values above are calculated.

System and application

The substrate condition for Intershield 803 has to be checked before application. Its mixing ratio and pot life are set out in the technical data.

Selection and consumption for Intershield 803 are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intershield 803 Abrasion-resistant epoxy coating”; parameters not listed here are governed by that data sheet.

Enquiries on Intershield 803

  • System selection for Intershield 803: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Intershield 803: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Intershield 803: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.