Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Marine coatings

Intershield 300HS High-solids abrasion-resistant aluminium-pigmented pure epoxy

Home | All models | Marine coatings | Intershield 300HS

Intershield 300HS High-solids abrasion-resistant aluminium-pigmented pure epoxy is supplied under the International Paint brand. It sits in the Marine coatings range. Technical data list: solids 78% ± 2%, spreading rate 6.24 m²/L, DFT 125 µm. Drying at 25 °C: 2 h touch dry, 4 h hard dry.

Basic data

Model
Intershield 300HS (High-solids abrasion-resistant aluminium-pigmented pure epoxy)
Product type
High-solids abrasion-resistant aluminium-pigmented pure epoxy
Category
Marine coatings
Volume solids
78% ± 2%
Theoretical spreading rate
6.24 m²/L
Recommended dry film thickness
125 µm
Drying (25°C substrate temperature)
Touch dry 2 h / Hard dry 4 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Intershield 300HS (High-solids abrasion-resistant aluminium-pigmented pure epoxy) data sheet; other conditions are not listed.
Other parameters
For Intershield 300HS, thinning and pack sizes are as stated in the technical data.

Consumption calculation

Theoretical consumption is 0.160 L/m² for Intershield 300HS, excluding application losses. That is about 16.0 L per 100 m². At a wet film of 160 µm. All figures are calculated.

System and application

For Intershield 300HS, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life are specified in the technical data sheet.

TDS and SDS for Intershield 300HS are available on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intershield 300HS High-solids abrasion-resistant aluminium-pigmented pure epoxy”; parameters not listed here are governed by that data sheet.

Enquiries on Intershield 300HS

  • System selection for Intershield 300HS: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Intershield 300HS: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Intershield 300HS: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.