Marine coatings
Intersheen 778 Modified acrylic topcoat
Home | All models | Marine coatings | Intersheen 778
Intersheen 778 Modified acrylic topcoat is supplied under the International Paint brand. It belongs to the Marine coatings range. Published figures are: solids 35% · DFT 40 µm · spreading rate 8.75 m²/L. Drying at 25 °C: 30 min touch dry, 8 h hard dry.
Basic data
- Model
- Intersheen 778
- Product type
- Modified acrylic topcoat
- Category
- Marine coatings
- Volume solids
- 35%
- Theoretical spreading rate
- 8.75 m²/L
- Recommended dry film thickness
- 40 µm
- Drying (25°C substrate temperature)
- Touch dry 30 min / Hard dry 8 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intersheen 778 data sheet; other conditions are not listed.
- Other parameters
- For Intersheen 778, mixing, thinning and pack sizes are given in the technical data sheet.
Consumption calculation
Coverage works out at 0.114 L/m² for Intersheen 778, excluding application losses. That is about 11.4 L per 100 m². At a wet film of 114 µm. These are theoretical values.
System and application
For Intersheen 778, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life follow that data sheet.
Consumption for Intersheen 778 is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intersheen 778 Modified acrylic topcoat”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intersheen 778
- System selection for Intersheen 778: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intersheen 778: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intersheen 778: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

