Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Marine coatings

Interseal 670HS - Low Temperature - Global High-solids low-surface-treatment epoxy primer

Home | All models | Marine coatings | Interseal 670HS - Low Temperature - Global

Interseal 670HS - Low Temperature - Global High-solids low-surface-treatment epoxy primer is supplied under the International Paint brand. It sits in the Marine coatings range. Technical data list: solids 82% ± 3% depending on · spreading rate 6.56 m²/L · DFT 250 µm. Drying at 25 °C: 60 min touch dry, 6 h hard dry.

Basic data

Model
Interseal 670HS - Low Temperature - Global
Product type
High-solids low-surface-treatment epoxy primer
Category
Marine coatings
Volume solids
82% ± 3% depending on
Theoretical spreading rate
6.56 m²/L
Recommended dry film thickness
250 µm
Drying (25°C substrate temperature)
Touch dry 60 min / Hard dry 6 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Interseal 670HS - Low Temperature - Global data sheet; other conditions are not listed.
Other parameters
For Interseal 670HS - Low Temperature - Global, thinning and pack sizes are as stated in the technical data.

Consumption calculation

Theoretical consumption is 0.152 L/m² for Interseal 670HS - Low Temperature - Global, excluding application losses. That is about 15.2 L per 100 m². At a wet film of 305 µm. All figures are calculated.

System and application

For Interseal 670HS - Low Temperature - Global, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life are specified in the technical data sheet.

Consumption for Interseal 670HS - Low Temperature - Global is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interseal 670HS - Low Temperature - Global High-solids low-surface-treatment epoxy primer”; parameters not listed here are governed by that data sheet.

Enquiries on Interseal 670HS - Low

  • System selection for Interseal 670HS - Low: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Interseal 670HS - Low: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Interseal 670HS - Low: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.