Marine coatings
Interprime 539 Modified PVB / phosphoric acid etch primer
Home | All models | Marine coatings | Interprime 539
Interprime 539 Modified PVB / phosphoric acid etch primer is supplied under the International Paint brand. It sits in the Marine coatings range. Technical data list: DFT 15 µm · spreading rate 16.00 m²/L · solids 24% ± 2%. At 25 °C it is 15 min touch dry and 30 min hard dry.
Basic data
- Model
- Interprime 539
- Product type
- Modified PVB / phosphoric acid etch primer
- Category
- Marine coatings
- Volume solids
- 24% ± 2%
- Theoretical spreading rate
- 16.00 m²/L
- Recommended dry film thickness
- 15 µm
- Drying (25°C substrate temperature)
- Touch dry 15 min / Hard dry 30 min
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interprime 539 data sheet; other conditions are not listed.
- Other parameters
- For Interprime 539, thinning and pack sizes are as stated in the technical data.
Consumption calculation
Theoretical consumption is 0.062 L/m² for Interprime 539, excluding application losses. That is about 6.2 L per 100 m². At a wet film of 62 µm. All figures are calculated.
System and application
The substrate condition for Interprime 539 has to be checked before application. Its mixing ratio and pot life are specified in the technical data sheet.
Technical data for Interprime 539 can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interprime 539 Modified PVB / phosphoric acid etch primer”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interprime 539
- System selection for Interprime 539: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interprime 539: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interprime 539: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

