Marine coatings
Interprime 538 Zinc phosphate primer
Home | All models | Marine coatings | Interprime 538
Interprime 538 Zinc phosphate primer is supplied under the International Paint brand. It is catalogued under Marine coatings. The data sheet gives: DFT 80 µm · solids 57% ± 2% · spreading rate 7.13 m²/L. Drying at 25 °C: 45 min touch dry, 3 days hard dry.
Basic data
- Model
- Interprime 538 (Zinc phosphate primer)
- Product type
- Zinc phosphate primer
- Category
- Marine coatings
- Volume solids
- 57% ± 2%
- Theoretical spreading rate
- 7.13 m²/L
- Recommended dry film thickness
- 80 µm
- Drying (25°C substrate temperature)
- Touch dry 45 min / Hard dry 3 days
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interprime 538 (Zinc phosphate primer) data sheet; other conditions are not listed.
- Other parameters
- For Interprime 538, the technical data sheet covers mixing, thinning and pack sizes.
Consumption calculation
Consumption is 0.140 L/m² for Interprime 538, excluding application losses. That is about 14.0 L per 100 m². At a wet film of 140 µm. The values above are calculated.
System and application
Interprime 538 as a primer, Surface preparation comes first. Its mixing ratio and pot life are set out in the technical data.
Consumption for Interprime 538 is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interprime 538 Zinc phosphate primer”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interprime 538 Zinc phosphate
- System selection for Interprime 538 Zinc phosphate: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interprime 538 Zinc phosphate: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interprime 538 Zinc phosphate: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

