Marine coatings
Interprime 128 One-component alkyd primer
Home | All models | Marine coatings | Interprime 128
Interprime 128 One-component alkyd primer is supplied under the International Paint brand. It sits in the Marine coatings range. Technical data list: DFT 75 µm, spreading rate 6.93 m²/L, solids 52% ± 2%. At 25 °C it is 60 min touch dry and 18 h hard dry.
Basic data
- Model
- Interprime 128
- Product type
- One-component alkyd primer
- Category
- Marine coatings
- Volume solids
- 52% ± 2%
- Theoretical spreading rate
- 6.93 m²/L
- Recommended dry film thickness
- 75 µm
- Drying (25°C substrate temperature)
- Touch dry 60 min / Hard dry 18 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interprime 128 data sheet; other conditions are not listed.
- Other parameters
- For Interprime 128, thinning and pack sizes are as stated in the technical data.
Consumption calculation
Theoretical consumption is 0.144 L/m² for Interprime 128, excluding application losses. That is about 14.4 L per 100 m². At a wet film of 144 µm. All figures are calculated.
System and application
The substrate condition for Interprime 128 has to be checked before application. Its mixing ratio and pot life are specified in the technical data sheet.
Selection and consumption for Interprime 128 are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interprime 128 One-component alkyd primer”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interprime 128
- System selection for Interprime 128: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interprime 128: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interprime 128: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

