Marine coatings
Interplate 8010 Zinc silicate shop primer
Home | All models | Marine coatings | Interplate 8010
Interplate 8010 Zinc silicate shop primer is supplied under the International Paint brand. It sits in the Marine coatings range. Technical data list: solids 28% ± 2%, spreading rate 35 m²/L, DFT 8 µm. Drying at 25 °C: 5 min hard dry.
Basic data
- Model
- Interplate 8010
- Product type
- Zinc silicate shop primer
- Category
- Marine coatings
- Volume solids
- 28% ± 2%
- Theoretical spreading rate
- 35 m²/L
- Recommended dry film thickness
- 8 µm
- Drying (25°C substrate temperature)
- Hard dry 5 min; the sheet gives hard dry only for this grade
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interplate 8010 data sheet; other conditions are not listed.
- Other parameters
- For Interplate 8010, thinning and pack sizes are as stated in the technical data.
Consumption calculation
Theoretical consumption is 0.029 L/m² for Interplate 8010, excluding application losses. That is about 2.9 L per 100 m². At a wet film of 29 µm. All figures are calculated.
System and application
For Interplate 8010, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life are specified in the technical data sheet.
TDS and SDS for Interplate 8010 are available on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interplate 8010 Zinc silicate shop primer”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interplate 8010
- System selection for Interplate 8010: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interplate 8010: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interplate 8010: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

