Marine coatings
Interline 904 Epoxy cargo tank coating
Home | All models | Marine coatings | Interline 904
Interline 904 Epoxy cargo tank coating is supplied under the International Paint brand. It is catalogued under Marine coatings. The data sheet gives: DFT 90 µm, solids 48% ± 2%, spreading rate 5.33 m²/L. Drying at 25 °C: 3 h touch dry, 7 h hard dry.
Basic data
- Model
- Interline 904
- Product type
- Epoxy cargo tank coating
- Category
- Marine coatings
- Volume solids
- 48% ± 2%
- Theoretical spreading rate
- 5.33 m²/L
- Recommended dry film thickness
- 90 µm
- Drying (25°C substrate temperature)
- Touch dry 3 h / Hard dry 7 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interline 904 data sheet; other conditions are not listed.
- Other parameters
- For Interline 904, the technical data sheet covers mixing, thinning and pack sizes.
Consumption calculation
Consumption is 0.188 L/m² for Interline 904, excluding application losses. That is about 18.8 L per 100 m². At a wet film of 188 µm. The values above are calculated.
System and application
For Interline 904, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life are set out in the technical data.
Consumption for Interline 904 is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interline 904 Epoxy cargo tank coating”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interline 904 Epoxy cargo
- System selection for Interline 904 Epoxy cargo: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interline 904 Epoxy cargo: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interline 904 Epoxy cargo: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

