Marine coatings
Interline 624 Two-component epoxy-phenolic cargo tank coating
Home | All models | Marine coatings | Interline 624
Interline 624 Two-component epoxy-phenolic cargo tank coating is supplied under the International Paint brand. It belongs to the Marine coatings range. Published figures are: spreading rate 6.3 m²/L, DFT 150 µm, solids 95% ± 2%. At 25 °C it is 5 h touch dry and 16 h hard dry.
Basic data
- Model
- Interline 624
- Product type
- Two-component epoxy-phenolic cargo tank coating
- Category
- Marine coatings
- Volume solids
- 95% ± 2%
- Theoretical spreading rate
- 6.3 m²/L
- Recommended dry film thickness
- 150 µm
- Drying (25°C substrate temperature)
- Touch dry 5 h / Hard dry 16 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interline 624 data sheet; other conditions are not listed.
- Other parameters
- For Interline 624, mixing, thinning and pack sizes are given in the technical data sheet.
Consumption calculation
Coverage works out at 0.159 L/m² for Interline 624, excluding application losses. That is about 15.9 L per 100 m². At a wet film of 158 µm. These are theoretical values.
System and application
The substrate condition for Interline 624 has to be checked before application. Its mixing ratio and pot life follow that data sheet.
Selection and consumption for Interline 624 are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interline 624 Two-component epoxy-phenolic cargo tank coating”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interline 624
- System selection for Interline 624: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interline 624: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interline 624: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

