Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Marine coatings

Interline 605 Inorganic zinc silicate

Home | All models | Marine coatings | Interline 605

Interline 605 Inorganic zinc silicate is supplied under the International Paint brand. It sits in the Marine coatings range. Technical data list: solids 62% ± 2%, spreading rate 4.96 m²/L, DFT 125 µm. Drying at 25 °C: 30 min touch dry, 2 h hard dry.

Marine coatingsInorganic zinc silicate

Basic data

Model
Interline 605 (Inorganic zinc silicate)
Product type
Inorganic zinc silicate
Category
Marine coatings
Volume solids
62% ± 2%
Theoretical spreading rate
4.96 m²/L
Recommended dry film thickness
125 µm
Drying (25°C substrate temperature)
Touch dry 30 min / Hard dry 2 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Interline 605 (Inorganic zinc silicate) data sheet; other conditions are not listed.
Other parameters
For Interline 605, thinning and pack sizes are as stated in the technical data.

Consumption calculation

Theoretical consumption is 0.202 L/m² for Interline 605, excluding application losses. That is about 20.2 L per 100 m². At a wet film of 202 µm. All figures are calculated.

System and application

For Interline 605, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life are specified in the technical data sheet.

TDS and SDS for Interline 605 are available on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interline 605 Inorganic zinc silicate”; parameters not listed here are governed by that data sheet.

Enquiries on Interline 605 Inorganic zinc

  • System selection for Interline 605 Inorganic zinc: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Interline 605 Inorganic zinc: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Interline 605 Inorganic zinc: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.