Interlac 1 Silicone alkyd topcoat is supplied under the International Paint brand. It is catalogued under Marine coatings. The data sheet gives: DFT 50 µm · solids 60% (ASTM D2697-86) · spreading rate 12 m²/L. Drying at 25 °C: 2 h touch dry, 8 h hard dry.
Basic data
- Model
- Interlac 1
- Product type
- Silicone alkyd topcoat
- Category
- Marine coatings
- Volume solids
- 60% (ASTM D2697-86)
- Theoretical spreading rate
- 12 m²/L
- Recommended dry film thickness
- 50 µm
- Drying (25°C substrate temperature)
- Touch dry 2 h / Hard dry 8 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interlac 1 data sheet; other conditions are not listed.
- Other parameters
- For Interlac 1, the technical data sheet covers mixing, thinning and pack sizes.
Consumption calculation
Consumption is 0.083 L/m² for Interlac 1, excluding application losses. That is about 8.3 L per 100 m². At a wet film of 83 µm. The values above are calculated.
System and application
For Interlac 1, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life are set out in the technical data.
Consumption for Interlac 1 is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interlac 1 Silicone alkyd topcoat”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interlac 1 Silicone alkyd
- System selection for Interlac 1 Silicone alkyd: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interlac 1 Silicone alkyd: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interlac 1 Silicone alkyd: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

