Industrial coatings
RELEST Wind WB Topcoat LI - I394-x8xx
Home | All models | Industrial coatings | RELEST Wind WB Topcoat LI - I394-x8xx
RELEST Wind WB Topcoat LI - I394-x8xx is supplied under the International Paint brand. It belongs to the Industrial coatings range. Published figures are: solids 46%, density 1.3 kg/L (10.8 lb/US gal), spreading rate 13.14 m²/L. Drying at 23 °C: 1 h touch dry, 7 h hard dry.
Basic data
- Model
- RELEST Wind WB Topcoat LI - I394-x8xx
- Product type
- As stated in the technical data sheet
- Category
- Industrial coatings
- Volume solids
- 46%
- Theoretical spreading rate
- 13.14 m²/L
- Density (specific gravity)
- 1.3 kg/L (10.8 lb/US gal)
- Drying (23°C substrate temperature)
- Touch dry 1 h / Hard dry 7 h
- Drying conditions
- Values are taken from the 23 °C substrate-temperature row of the drying table in the RELEST Wind WB Topcoat LI - I394-x8xx data sheet; other conditions are not listed.
- Other parameters
- For RELEST Wind WB Topcoat LI - I394-x8xx, mixing, thinning and pack sizes are given in the technical data sheet.
Consumption calculation
Coverage works out at 0.076 L/m² for RELEST Wind WB Topcoat LI - I394-x8xx, excluding application losses. That is about 7.6 L per 100 m². Coverage is 10.11 m² per kg. These are theoretical values.
System and application
RELEST Wind WB Topcoat LI - I394-x8xx is applied as a topcoat. The previous coat must be cured and clean. Its mixing ratio and pot life follow that data sheet.
Consumption for RELEST Wind WB Topcoat LI - I394-x8xx is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “RELEST Wind WB Topcoat LI - I394-x8xx ”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on RELEST Wind WB Topcoat LI -
- System selection for RELEST Wind WB Topcoat LI -: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for RELEST Wind WB Topcoat LI -: take-off from area and design dry film thickness, quoted against quantity.
- Documents for RELEST Wind WB Topcoat LI -: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

