Industrial coatings
Ceilcote 232 Flakeline Phenolic vinyl ester resin coating
Home | All models | Industrial coatings | Ceilcote 232 Flakeline
Ceilcote 232 Flakeline Phenolic vinyl ester resin coating is supplied under the International Paint brand. It belongs to the Industrial coatings range. Its function is glass-flake barrier protection. Published figures are: density 1.25 kg/L (10.4 lb/US gal) · DFT 375-625 µm (15-25 mil) · spreading rate 1.89 m²/L · solids 100%. Drying at 25 °C: 2 h touch dry, 4.5 h hard dry.
Basic data
- Model
- Ceilcote 232 Flakeline
- Product type
- Phenolic vinyl ester resin coating
- Category
- Industrial coatings
- Volume solids
- 100%
- Theoretical spreading rate
- 1.89 m²/L
- Recommended dry film thickness
- 375-625 µm (15-25 mil)
- Density (specific gravity)
- 1.25 kg/L (10.4 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 2 h / Hard dry 4.5 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Ceilcote 232 Flakeline data sheet; other conditions are not listed.
- Other parameters
- For Ceilcote 232 Flakeline, mixing, thinning and pack sizes are given in the technical data sheet.
Consumption calculation
Coverage works out at 0.529 L/m² for Ceilcote 232 Flakeline, excluding application losses. That is about 52.9 L per 100 m². At a wet film of 375–625 µm, coverage is 1.51 m² per kg. These are theoretical values.
System and application
For Ceilcote 232 Flakeline, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life follow that data sheet.
Consumption for Ceilcote 232 Flakeline is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Ceilcote 232 Flakeline Phenolic vinyl ester resin coating”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Ceilcote 232 Flakeline
- System selection for Ceilcote 232 Flakeline: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Ceilcote 232 Flakeline: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Ceilcote 232 Flakeline: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

