Industrial coatings
Ceilcote 68 Lining Reinforced lining
Home | All models | Industrial coatings | Ceilcote 68 Lining
Ceilcote 68 Lining Reinforced lining is an epoxy coating, supplied under the International Paint brand. It belongs to the Industrial coatings range. Published figures are: density 1.08 kg/L (9.0 lb/US gal) · solids 97%. At 23 °C it is 8 h touch dry and 24 h hard dry.
Basic data
- Model
- Ceilcote 68 Lining
- Product type
- Reinforced lining
- Category
- Industrial coatings
- Volume solids
- 97%
- Density (specific gravity)
- 1.08 kg/L (9.0 lb/US gal)
- Drying (23°C substrate temperature)
- Touch dry 8 h / Hard dry 24 h
- Drying conditions
- Values are taken from the 23 °C substrate-temperature row of the drying table in the Ceilcote 68 Lining data sheet; other conditions are not listed.
- Other parameters
- For Ceilcote 68 Lining, mixing, thinning and pack sizes are given in the technical data sheet.
Consumption calculation
The TDS gives no spreading rate for Ceilcote 68 Lining; consumption is taken from it.
System and application
The substrate condition for Ceilcote 68 Lining has to be checked before application. Its mixing ratio and pot life follow that data sheet.
Technical data for Ceilcote 68 Lining can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Ceilcote 68 Lining Reinforced lining”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Ceilcote 68 Lining Reinforced
- System selection for Ceilcote 68 Lining Reinforced: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Ceilcote 68 Lining Reinforced: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Ceilcote 68 Lining Reinforced: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

