Industrial coatings
RELEST Wind Putty Porefiller - I372-5615 Micro-porosity filler
Home | All models | Industrial coatings | RELEST Wind Putty Porefiller - I372-5615
RELEST Wind Putty Porefiller - I372-5615 Micro-porosity filler is a polyurethane coating for auxiliary use, supplied under the International Paint brand. It belongs to the Industrial coatings range. Published figures are: density 1.33 g/cm³ (after mixing), solids 99.5%. Drying at 23 °C: 20 min touch dry, 140 min hard dry.
Basic data
- Model
- RELEST Wind Putty Porefiller - I372-5615
- Product type
- Micro-porosity filler
- Category
- Industrial coatings
- Volume solids
- 99.5%
- Density (specific gravity)
- 1.33 g/cm³ (after mixing)
- Drying (23°C substrate temperature)
- Touch dry 20 min / Hard dry 140 min
- Drying conditions
- Values are taken from the 23 °C substrate-temperature row of the drying table in the RELEST Wind Putty Porefiller - I372-5615 data sheet; other conditions are not listed.
- Other parameters
- For RELEST Wind Putty Porefiller - I372-5615, mixing, thinning and pack sizes are given in the technical data sheet.
Consumption calculation
The TDS gives no spreading rate for RELEST Wind Putty Porefiller - I372-5615; consumption is taken from it.
System and application
For RELEST Wind Putty Porefiller - I372-5615, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life follow that data sheet.
TDS and SDS for RELEST Wind Putty Porefiller - I372-5615 are available on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “RELEST Wind Putty Porefiller - I372-5615 Micro-porosity filler”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on RELEST Wind Putty Porefiller
- System selection for RELEST Wind Putty Porefiller: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for RELEST Wind Putty Porefiller: take-off from area and design dry film thickness, quoted against quantity.
- Documents for RELEST Wind Putty Porefiller: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

