Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

RELEST Wind Putty Porefiller Cartridge - I372-6015 Micro-porosity filler

Home | All models | Industrial coatings | RELEST Wind Putty Porefiller Cartridge - I372-6015

RELEST Wind Putty Porefiller Cartridge - I372-6015 Micro-porosity filler is a polyurethane coating for auxiliary use, supplied under the International Paint brand. It sits in the Industrial coatings range. Technical data list: solids >99%, density 1.33 g/cm³. At 23 °C it is 20 min touch dry and 140 min hard dry.

Industrial coatingsAuxiliaryPolyurethane

Basic data

Model
RELEST Wind Putty Porefiller Cartridge - I372-6015
Product type
Micro-porosity filler
Category
Industrial coatings
Volume solids
>99%
Density (specific gravity)
1.33 g/cm³
Drying (23°C substrate temperature)
Touch dry 20 min / Hard dry 140 min
Drying conditions
Values are taken from the 23 °C substrate-temperature row of the drying table in the RELEST Wind Putty Porefiller Cartridge - I372-6015 data sheet; other conditions are not listed.
Other parameters
For RELEST Wind Putty Porefiller Cartridge - I372-6015, thinning and pack sizes are as stated in the technical data.

Consumption calculation

No spreading rate is listed for RELEST Wind Putty Porefiller Cartridge - I372-6015; consumption follows the TDS.

System and application

The substrate condition for RELEST Wind Putty Porefiller Cartridge - I372-6015 has to be checked before application. Its mixing ratio and pot life are specified in the technical data sheet.

Selection and consumption for RELEST Wind Putty Porefiller Cartridge - I372-6015 are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “RELEST Wind Putty Porefiller Cartridge - I372-6015 Micro-porosity filler”; parameters not listed here are governed by that data sheet.

Enquiries on RELEST Wind Putty Porefiller

  • System selection for RELEST Wind Putty Porefiller: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for RELEST Wind Putty Porefiller: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for RELEST Wind Putty Porefiller: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.