Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

RELEST Wind HS Topcoat - I306-xxxx High-solids topcoat

Home | All models | Industrial coatings | RELEST Wind HS Topcoat - I306-xxxx

RELEST Wind HS Topcoat - I306-xxxx High-solids topcoat is supplied under the International Paint brand. It sits in the Industrial coatings range. Technical data list: density 1.3 kg/L (10.8 lb/US gal), spreading rate 10 m²/L, solids 55% ± 2%(depending on colour). At 23 °C it is 2 h touch dry and 5 h hard dry.

Basic data

Model
RELEST Wind HS Topcoat - I306-xxxx (High-solids topcoat)
Product type
High-solids topcoat
Category
Industrial coatings
Volume solids
55% ± 2%(depending on colour)
Theoretical spreading rate
10 m²/L
Density (specific gravity)
1.3 kg/L (10.8 lb/US gal)
Drying (23°C substrate temperature)
Touch dry 2 h / Hard dry 5 h
Drying conditions
Values are taken from the 23 °C substrate-temperature row of the drying table in the RELEST Wind HS Topcoat - I306-xxxx (High-solids topcoat) data sheet; other conditions are not listed.
Other parameters
For RELEST Wind HS Topcoat - I306-xxxx, thinning and pack sizes are as stated in the technical data.

Consumption calculation

Theoretical consumption is 0.100 L/m² for RELEST Wind HS Topcoat - I306-xxxx, excluding application losses. That is about 10.0 L per 100 m². Coverage is 7.69 m² per kg. All figures are calculated.

System and application

RELEST Wind HS Topcoat - I306-xxxx as a topcoat, The previous coat must already be cured. Its mixing ratio and pot life are specified in the technical data sheet.

Technical data for RELEST Wind HS Topcoat - I306-xxxx can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “RELEST Wind HS Topcoat - I306-xxxx High-solids topcoat”; parameters not listed here are governed by that data sheet.

Enquiries on RELEST Wind HS Topcoat -

  • System selection for RELEST Wind HS Topcoat -: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for RELEST Wind HS Topcoat -: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for RELEST Wind HS Topcoat -: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.