Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

RELEST Wind Gelcoat Transparent - I372-0002 In-mould gelcoat

Home | All models | Industrial coatings | RELEST Wind Gelcoat Transparent - I372-0002

RELEST Wind Gelcoat Transparent - I372-0002 In-mould gelcoat is a polyurethane coating for intermediate use, supplied under the International Paint brand. It belongs to the Industrial coatings range. Published figures are: spreading rate 0.5 kg/m2, solids 99%, density 1.11 kg/L (9.3 lb/US gal), DFT 450μm(18 mil). Drying at 23 °C: 25 min touch dry, 95 min hard dry.

Industrial coatingsIntermediatePolyurethane

Basic data

Model
RELEST Wind Gelcoat Transparent - I372-0002 (In-mould gelcoat)
Product type
In-mould gelcoat
Category
Industrial coatings
Volume solids
99%
Theoretical spreading rate
0.5 kg/m2
Recommended dry film thickness
450μm(18 mil)
Density (specific gravity)
1.11 kg/L (9.3 lb/US gal)
Drying (23°C substrate temperature)
Touch dry 25 min / Hard dry 95 min
Drying conditions
Values are taken from the 23 °C substrate-temperature row of the drying table in the RELEST Wind Gelcoat Transparent - I372-0002 (In-mould gelcoat) data sheet; other conditions are not listed.
Other parameters
For RELEST Wind Gelcoat Transparent - I372-0002, mixing, thinning and pack sizes are given in the technical data sheet.

Consumption calculation

Coverage works out at 2.000 L/m² for RELEST Wind Gelcoat Transparent - I372-0002, excluding application losses. That is about 200.0 L per 100 m². At a wet film of 455 µm, coverage is 0.45 m² per kg. These are theoretical values.

System and application

RELEST Wind Gelcoat Transparent - I372-0002 as an intermediate, Compatibility with both adjacent coats has to be confirmed. Its mixing ratio and pot life follow that data sheet.

TDS and SDS for RELEST Wind Gelcoat Transparent - I372-0002 are available on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “RELEST Wind Gelcoat Transparent - I372-0002 In-mould gelcoat”; parameters not listed here are governed by that data sheet.

Enquiries on RELEST Wind Gelcoat

  • System selection for RELEST Wind Gelcoat: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for RELEST Wind Gelcoat: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for RELEST Wind Gelcoat: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.