Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Polibrid 705E Elastomeric polyurea polyurethane

Home | All models | Industrial coatings | Polibrid 705E

Polibrid 705E Elastomeric polyurea polyurethane is supplied under the International Paint brand. It sits in the Industrial coatings range. Technical data list: DFT 700-5000 µm (28-200 mil), spreading rate 0.50 m²/L, solids 100%, density 1.14 kg/L (9.5 lb/US gal). At 25 °C it is 1 h touch dry and 1 days hard dry.

Basic data

Model
Polibrid 705E (Elastomeric polyurea polyurethane)
Product type
Elastomeric polyurea polyurethane
Category
Industrial coatings
Volume solids
100%
Theoretical spreading rate
0.50 m²/L
Recommended dry film thickness
700-5000 µm (28-200 mil)
Density (specific gravity)
1.14 kg/L (9.5 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 1 h / Hard dry 1 days
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Polibrid 705E (Elastomeric polyurea polyurethane) data sheet; other conditions are not listed.
Other parameters
For Polibrid 705E, thinning and pack sizes are as stated in the technical data.

Consumption calculation

Theoretical consumption is 2.000 L/m² for Polibrid 705E, excluding application losses. That is about 200.0 L per 100 m². At a wet film of 700–5000 µm, coverage is 0.44 m² per kg. All figures are calculated.

System and application

The substrate condition for Polibrid 705E has to be checked before application. Its mixing ratio and pot life are specified in the technical data sheet.

Selection and consumption for Polibrid 705E are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Polibrid 705E Elastomeric polyurea polyurethane”; parameters not listed here are governed by that data sheet.

Enquiries on Polibrid 705E

  • System selection for Polibrid 705E: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Polibrid 705E: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Polibrid 705E: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.