Industrial coatings
Interzone 954 Modified epoxy coating
Home | All models | Industrial coatings | Interzone 954
Interzone 954 Modified epoxy coating is supplied under the International Paint brand. It sits in the Industrial coatings range. Technical data list: solids 85% ± 3% (depending on colour), density 1.62 kg/L (13.5 lb/US gal), DFT 250-500 µm (10-20 mil), spreading rate 1.70 m²/L. At 25 °C it is 3.5 h touch dry and 5.5 h hard dry.
Basic data
- Model
- Interzone 954 (Modified epoxy coating)
- Product type
- Modified epoxy coating
- Category
- Industrial coatings
- Volume solids
- 85% ± 3% (depending on colour)
- Theoretical spreading rate
- 1.70 m²/L
- Recommended dry film thickness
- 250-500 µm (10-20 mil)
- Density (specific gravity)
- 1.62 kg/L (13.5 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 3.5 h / Hard dry 5.5 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interzone 954 (Modified epoxy coating) data sheet; other conditions are not listed.
- Other parameters
- For Interzone 954, thinning and pack sizes are as stated in the technical data.
Consumption calculation
Theoretical consumption is 0.588 L/m² for Interzone 954, excluding application losses. That is about 58.8 L per 100 m². At a wet film of 294–588 µm, coverage is 1.05 m² per kg. All figures are calculated.
System and application
The substrate condition for Interzone 954 has to be checked before application. Its mixing ratio and pot life are specified in the technical data sheet.
Technical data for Interzone 954 can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interzone 954 Modified epoxy coating”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interzone 954 Modified epoxy
- System selection for Interzone 954 Modified epoxy: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interzone 954 Modified epoxy: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interzone 954 Modified epoxy: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

