Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Interzone 485 Ultra-high-build epoxy coating

Home | All models | Industrial coatings | Interzone 485

Interzone 485 Ultra-high-build epoxy coating is supplied under the International Paint brand. It is catalogued under Industrial coatings. The data sheet gives: solids 99% · spreading rate 0.99 m²/L · DFT 1000-3000 µm (40-120 mil) · density 1.1 kg/L (9.2 lb/US gal). Drying at 25 °C: 4 h touch dry, 24 h hard dry.

Basic data

Model
Interzone 485 (Ultra-high-build epoxy coating)
Product type
Ultra-high-build epoxy coating
Category
Industrial coatings
Volume solids
99%
Theoretical spreading rate
0.99 m²/L
Recommended dry film thickness
1000-3000 µm (40-120 mil)
Density (specific gravity)
1.1 kg/L (9.2 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 4 h / Hard dry 24 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Interzone 485 (Ultra-high-build epoxy coating) data sheet; other conditions are not listed.
Other parameters
For Interzone 485, the technical data sheet covers mixing, thinning and pack sizes.

Consumption calculation

Consumption is 1.010 L/m² for Interzone 485, excluding application losses. That is about 101.0 L per 100 m². At a wet film of 1010–3030 µm, coverage is 0.90 m² per kg. The values above are calculated.

System and application

For Interzone 485, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life are set out in the technical data.

Consumption for Interzone 485 is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interzone 485 Ultra-high-build epoxy coating”; parameters not listed here are governed by that data sheet.

Enquiries on Interzone 485

  • System selection for Interzone 485: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Interzone 485: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Interzone 485: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.