Industrial coatings
Interzone 278 Single-coat
Home | All models | Industrial coatings | Interzone 278
Interzone 278 Single-coat is an epoxy coating, supplied under the International Paint brand. It is catalogued under Industrial coatings. The data sheet gives: solids 83% · spreading rate 2.77 m²/L · DFT 200-500 µm (8-20 mil) · density 1.7 kg/L (14.2 lb/US gal). Drying at 25 °C: 4 h touch dry, 16 h hard dry.
Basic data
- Model
- Interzone 278
- Product type
- Single-coat
- Category
- Industrial coatings
- Volume solids
- 83%
- Theoretical spreading rate
- 2.77 m²/L
- Recommended dry film thickness
- 200-500 µm (8-20 mil)
- Density (specific gravity)
- 1.7 kg/L (14.2 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 4 h / Hard dry 16 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interzone 278 data sheet; other conditions are not listed.
- Other parameters
- For Interzone 278, the technical data sheet covers mixing, thinning and pack sizes.
Consumption calculation
Consumption is 0.361 L/m² for Interzone 278, excluding application losses. That is about 36.1 L per 100 m². At a wet film of 241–602 µm, coverage is 1.63 m² per kg. The values above are calculated.
System and application
For Interzone 278, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life are set out in the technical data.
Consumption for Interzone 278 is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interzone 278 Single-coat”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interzone 278 Single-coat
- System selection for Interzone 278 Single-coat: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interzone 278 Single-coat: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interzone 278 Single-coat: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

