Industrial coatings
Interzinc 697 Inorganic zinc silicate coating
Home | All models | Industrial coatings | Interzinc 697
Interzinc 697 Inorganic zinc silicate coating is supplied under the International Paint brand. It is catalogued under Industrial coatings. It provides zinc-rich priming. The data sheet gives: spreading rate 8 m²/L · solids 60% · density 3.62 kg/L (30.2 lb/US gal). At 25 °C it is 25 min touch dry and 45 min hard dry.
Basic data
- Model
- Interzinc 697 (Inorganic zinc silicate coating)
- Product type
- Inorganic zinc silicate coating
- Category
- Industrial coatings
- Volume solids
- 60%
- Theoretical spreading rate
- 8 m²/L
- Density (specific gravity)
- 3.62 kg/L (30.2 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 25 min / Hard dry 45 min
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interzinc 697 (Inorganic zinc silicate coating) data sheet; other conditions are not listed.
- Other parameters
- For Interzinc 697, the technical data sheet covers mixing, thinning and pack sizes.
Consumption calculation
Consumption is 0.125 L/m² for Interzinc 697, excluding application losses. That is about 12.5 L per 100 m². Coverage is 2.21 m² per kg. The values above are calculated.
System and application
The substrate condition for Interzinc 697 has to be checked before application. Its mixing ratio and pot life are set out in the technical data.
Technical data for Interzinc 697 can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interzinc 697 Inorganic zinc silicate coating”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interzinc 697
- System selection for Interzinc 697: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interzinc 697: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interzinc 697: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

