Industrial coatings
Interzinc 42 Epoxy zinc-dust primer
Home | All models | Industrial coatings | Interzinc 42
Interzinc 42 Epoxy zinc-dust primer is supplied under the International Paint brand for primer use. It belongs to the Industrial coatings range. It provides zinc-rich priming. Published figures are: spreading rate 7.33 m²/L, DFT 50-75 µm (2-3 mil), density 1.94 kg/L (16.2 lb/US gal), solids 55%. At 25 °C it is 45 min touch dry and 150 min hard dry.
Basic data
- Model
- Interzinc 42 (Epoxy zinc-dust primer)
- Product type
- Epoxy zinc-dust primer
- Category
- Industrial coatings
- Volume solids
- 55%
- Theoretical spreading rate
- 7.33 m²/L
- Recommended dry film thickness
- 50-75 µm (2-3 mil)
- Density (specific gravity)
- 1.94 kg/L (16.2 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 45 min / Hard dry 150 min
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interzinc 42 (Epoxy zinc-dust primer) data sheet; other conditions are not listed.
- Other parameters
- For Interzinc 42, mixing, thinning and pack sizes are given in the technical data sheet.
Consumption calculation
Coverage works out at 0.136 L/m² for Interzinc 42, excluding application losses. That is about 13.6 L per 100 m². At a wet film of 91–136 µm, coverage is 3.78 m² per kg. These are theoretical values.
System and application
Interzinc 42 is applied as a primer. Surface preparation is the critical step. Its mixing ratio and pot life follow that data sheet.
Technical data for Interzinc 42 can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interzinc 42 Epoxy zinc-dust primer”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interzinc 42 Epoxy zinc-dust
- System selection for Interzinc 42 Epoxy zinc-dust: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interzinc 42 Epoxy zinc-dust: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interzinc 42 Epoxy zinc-dust: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

