Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Interzinc 388 Epoxy zinc-rich primer

Home | All models | Industrial coatings | Interzinc 388

Interzinc 388 Epoxy zinc-rich primer is supplied under the International Paint brand for primer use. It is catalogued under Industrial coatings. Its function is zinc-rich priming. The data sheet gives: DFT 50-75 µm (2-3 mil) · density 2.38 kg/L (19.9 lb/US gal) · solids 59% · spreading rate 7.87 m²/L. Drying at 25 °C: 75 min touch dry, 4 h hard dry.

Industrial coatingsPrimerZinc-rich primerEpoxy

Basic data

Model
Interzinc 388 (Epoxy zinc-rich primer)
Product type
Epoxy zinc-rich primer
Category
Industrial coatings
Volume solids
59%
Theoretical spreading rate
7.87 m²/L
Recommended dry film thickness
50-75 µm (2-3 mil)
Density (specific gravity)
2.38 kg/L (19.9 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 75 min / Hard dry 4 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Interzinc 388 (Epoxy zinc-rich primer) data sheet; other conditions are not listed.
Other parameters
For Interzinc 388, the technical data sheet covers mixing, thinning and pack sizes.

Consumption calculation

Consumption is 0.127 L/m² for Interzinc 388, excluding application losses. That is about 12.7 L per 100 m². At a wet film of 85–127 µm, coverage is 3.31 m² per kg. The values above are calculated.

System and application

Interzinc 388 as a primer, Surface preparation comes first. Its mixing ratio and pot life are set out in the technical data.

TDS and SDS for Interzinc 388 are available on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interzinc 388 Epoxy zinc-rich primer”; parameters not listed here are governed by that data sheet.

Enquiries on Interzinc 388 Epoxy zinc-rich

  • System selection for Interzinc 388 Epoxy zinc-rich: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Interzinc 388 Epoxy zinc-rich: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Interzinc 388 Epoxy zinc-rich: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.