Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Interzinc 315 Fast-overcoatable epoxy zinc-rich primer

Home | All models | Industrial coatings | Interzinc 315

Interzinc 315 Fast-overcoatable epoxy zinc-rich primer is supplied under the International Paint brand for primer use. It belongs to the Industrial coatings range. Its function is zinc-rich priming. Published figures are: density 3.16 kg/L (26.4 lb/US gal) · DFT 50-75 µm (2-3 mil) · spreading rate 13.80 m²/L · solids 69%. Drying at 25 °C: 15 min touch dry, 2 h hard dry.

Industrial coatingsPrimerZinc-rich primerEpoxy

Basic data

Model
Interzinc 315 (Fast-overcoatable epoxy zinc-rich primer)
Product type
Fast-overcoatable epoxy zinc-rich primer
Category
Industrial coatings
Volume solids
69%
Theoretical spreading rate
13.80 m²/L
Recommended dry film thickness
50-75 µm (2-3 mil)
Density (specific gravity)
3.16 kg/L (26.4 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 15 min / Hard dry 2 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Interzinc 315 (Fast-overcoatable epoxy zinc-rich primer) data sheet; other conditions are not listed.
Other parameters
For Interzinc 315, mixing, thinning and pack sizes are given in the technical data sheet.

Consumption calculation

Coverage works out at 0.072 L/m² for Interzinc 315, excluding application losses. That is about 7.2 L per 100 m². At a wet film of 72–109 µm, coverage is 4.37 m² per kg. These are theoretical values.

System and application

Interzinc 315 as a primer, Surface preparation comes first. Its mixing ratio and pot life follow that data sheet.

Consumption for Interzinc 315 is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interzinc 315 Fast-overcoatable epoxy zinc-rich primer”; parameters not listed here are governed by that data sheet.

Enquiries on Interzinc 315

  • System selection for Interzinc 315: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Interzinc 315: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Interzinc 315: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.