Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Interzinc 22HS High-efficiency galvanising primer

Home | All models | Industrial coatings | Interzinc 22HS

Interzinc 22HS High-efficiency galvanising primer is supplied under the International Paint brand. It is catalogued under Industrial coatings. Its function is zinc-rich priming. The data sheet gives: DFT 62-75 µm (2.5-3 mil) · density 3.28 kg/L (27.4 lb/US gal) · solids 81% ± 2% · spreading rate 13.06 m²/L. Drying at 25 °C: 15 min touch dry, 1 h hard dry.

Industrial coatingsZinc-rich primer

Basic data

Model
Interzinc 22HS
Product type
High-efficiency galvanising primer
Category
Industrial coatings
Volume solids
81% ± 2%
Theoretical spreading rate
13.06 m²/L
Recommended dry film thickness
62-75 µm (2.5-3 mil)
Density (specific gravity)
3.28 kg/L (27.4 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 15 min / Hard dry 1 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Interzinc 22HS data sheet; other conditions are not listed.
Other parameters
For Interzinc 22HS, the technical data sheet covers mixing, thinning and pack sizes.

Consumption calculation

Consumption is 0.077 L/m² for Interzinc 22HS, excluding application losses. That is about 7.7 L per 100 m². At a wet film of 77–93 µm, coverage is 3.98 m² per kg. The values above are calculated.

System and application

For Interzinc 22HS, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life are set out in the technical data.

TDS and SDS for Interzinc 22HS are available on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interzinc 22HS High-efficiency galvanising primer”; parameters not listed here are governed by that data sheet.

Enquiries on Interzinc 22HS

  • System selection for Interzinc 22HS: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Interzinc 22HS: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Interzinc 22HS: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.