Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Interzinc 2280 Inorganic zinc-rich primer

Home | All models | Industrial coatings | Interzinc 2280

Interzinc 2280 Inorganic zinc-rich primer is supplied under the International Paint brand. It belongs to the Industrial coatings range. It provides zinc-rich priming. Published figures are: density 2.4 kg/L (20.0 lb/US gal), solids 65%, spreading rate 8.67 m²/L, DFT 50-75 µm (2-3 mil). At 25 °C it is 10 min touch dry and 1 h hard dry.

Industrial coatingsPrimerZinc-rich primer

Basic data

Model
Interzinc 2280 (Inorganic zinc-rich primer)
Product type
Inorganic zinc-rich primer
Category
Industrial coatings
Volume solids
65%
Theoretical spreading rate
8.67 m²/L
Recommended dry film thickness
50-75 µm (2-3 mil)
Density (specific gravity)
2.4 kg/L (20.0 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 10 min / Hard dry 1 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Interzinc 2280 (Inorganic zinc-rich primer) data sheet; other conditions are not listed.
Other parameters
For Interzinc 2280, mixing, thinning and pack sizes are given in the technical data sheet.

Consumption calculation

Coverage works out at 0.115 L/m² for Interzinc 2280, excluding application losses. That is about 11.5 L per 100 m². At a wet film of 77–115 µm, coverage is 3.61 m² per kg. These are theoretical values.

System and application

Interzinc 2280 is applied as a primer. Surface preparation is the critical step. Its mixing ratio and pot life follow that data sheet.

Selection and consumption for Interzinc 2280 are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interzinc 2280 Inorganic zinc-rich primer”; parameters not listed here are governed by that data sheet.

Enquiries on Interzinc 2280

  • System selection for Interzinc 2280: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Interzinc 2280: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Interzinc 2280: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.