Industrial coatings
Interzinc 22 Inorganic zinc-rich primer
Home | All models | Industrial coatings | Interzinc 22
Interzinc 22 Inorganic zinc-rich primer is supplied under the International Paint brand. It is catalogued under Industrial coatings. It provides zinc-rich priming. The data sheet gives: DFT 50-75 µm (2-3 mil), spreading rate 8.40 m²/L, solids 63%, density 2.44 kg/L (20.4 lb/US gal). At 25 °C it is 10 min touch dry and 1 h hard dry.
Basic data
- Model
- Interzinc 22 (Inorganic zinc-rich primer)
- Product type
- Inorganic zinc-rich primer
- Category
- Industrial coatings
- Volume solids
- 63%
- Theoretical spreading rate
- 8.40 m²/L
- Recommended dry film thickness
- 50-75 µm (2-3 mil)
- Density (specific gravity)
- 2.44 kg/L (20.4 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 10 min / Hard dry 1 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interzinc 22 (Inorganic zinc-rich primer) data sheet; other conditions are not listed.
- Other parameters
- For Interzinc 22, the technical data sheet covers mixing, thinning and pack sizes.
Consumption calculation
Consumption is 0.119 L/m² for Interzinc 22, excluding application losses. That is about 11.9 L per 100 m². At a wet film of 79–119 µm, coverage is 3.44 m² per kg. The values above are calculated.
System and application
Interzinc 22 is applied as a primer. Surface preparation is the critical step. Its mixing ratio and pot life are set out in the technical data.
Selection and consumption for Interzinc 22 are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interzinc 22 Inorganic zinc-rich primer”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interzinc 22
- System selection for Interzinc 22: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interzinc 22: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interzinc 22: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

