Industrial coatings
Intertherm 50 Silicone high-temperature coating
Home | All models | Industrial coatings | Intertherm 50
Intertherm 50 Silicone high-temperature coating is supplied under the International Paint brand. It sits in the Industrial coatings range. Its function is heat resistance. Technical data list: solids 45% · spreading rate 18 m²/L · density 1.13 kg/L (9.4 lb/US gal). Drying at 25 °C: 30 min touch dry, 2 h hard dry.
Basic data
- Model
- Intertherm 50 (Silicone high-temperature coating)
- Product type
- Silicone high-temperature coating
- Category
- Industrial coatings
- Volume solids
- 45%
- Theoretical spreading rate
- 18 m²/L
- Density (specific gravity)
- 1.13 kg/L (9.4 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 30 min / Hard dry 2 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intertherm 50 (Silicone high-temperature coating) data sheet; other conditions are not listed.
- Other parameters
- For Intertherm 50, thinning and pack sizes are as stated in the technical data.
Consumption calculation
Theoretical consumption is 0.056 L/m² for Intertherm 50, excluding application losses. That is about 5.6 L per 100 m². Coverage is 15.93 m² per kg. All figures are calculated.
System and application
For Intertherm 50, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life are specified in the technical data sheet.
Consumption for Intertherm 50 is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intertherm 50 Silicone high-temperature coating”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intertherm 50
- System selection for Intertherm 50: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intertherm 50: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intertherm 50: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

