Industrial coatings
Interthane 870UHS Primer surface
Home | All models | Industrial coatings | Interthane 870UHS
Interthane 870UHS Primer surface is a polyurethane coating for topcoat use, supplied under the International Paint brand. It sits in the Industrial coatings range. Technical data list: DFT 75-125 µm (3-5 mil) · density 1.45 kg/L (12.1 lb/US gal) · solids 68% ± 3% (depending on colour) · spreading rate 5.40 m²/L. Drying at 25 °C: 1.5 h touch dry, 6 h hard dry.
Basic data
- Model
- Interthane 870UHS
- Product type
- Primer surface
- Category
- Industrial coatings
- Volume solids
- 68% ± 3% (depending on colour)
- Theoretical spreading rate
- 5.40 m²/L
- Recommended dry film thickness
- 75-125 µm (3-5 mil)
- Density (specific gravity)
- 1.45 kg/L (12.1 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 1.5 h / Hard dry 6 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interthane 870UHS data sheet; other conditions are not listed.
- Other parameters
- For Interthane 870UHS, thinning and pack sizes are as stated in the technical data.
Consumption calculation
Theoretical consumption is 0.185 L/m² for Interthane 870UHS, excluding application losses. That is about 18.5 L per 100 m². At a wet film of 110–184 µm, coverage is 3.72 m² per kg. All figures are calculated.
System and application
Interthane 870UHS is applied as a topcoat. The previous coat must be cured and clean. Its mixing ratio and pot life are specified in the technical data sheet.
TDS and SDS for Interthane 870UHS are available on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interthane 870UHS Primer surface”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interthane 870UHS Primer
- System selection for Interthane 870UHS Primer: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interthane 870UHS Primer: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interthane 870UHS Primer: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

