Industrial coatings
Interthane 870 Polyurethane topcoat
Home | All models | Industrial coatings | Interthane 870
Interthane 870 Polyurethane topcoat is supplied under the International Paint brand for topcoat use. It sits in the Industrial coatings range. Technical data list: DFT 75-125 µm (3-5 mil) · density 1.38 kg/L (11.5 lb/US gal) · solids 56% ± 3% (depending on colour) · spreading rate 4.48 m²/L. Drying at 25 °C: 60 min touch dry, 5 h hard dry.
Basic data
- Model
- Interthane 870 (Polyurethane topcoat)
- Product type
- Polyurethane topcoat
- Category
- Industrial coatings
- Volume solids
- 56% ± 3% (depending on colour)
- Theoretical spreading rate
- 4.48 m²/L
- Recommended dry film thickness
- 75-125 µm (3-5 mil)
- Density (specific gravity)
- 1.38 kg/L (11.5 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 60 min / Hard dry 5 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interthane 870 (Polyurethane topcoat) data sheet; other conditions are not listed.
- Other parameters
- For Interthane 870, thinning and pack sizes are as stated in the technical data.
Consumption calculation
Theoretical consumption is 0.223 L/m² for Interthane 870, excluding application losses. That is about 22.3 L per 100 m². At a wet film of 134–223 µm, coverage is 3.25 m² per kg. All figures are calculated.
System and application
Interthane 870 is applied as a topcoat. The previous coat must be cured and clean. Its mixing ratio and pot life are specified in the technical data sheet.
TDS and SDS for Interthane 870 are available on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interthane 870 Polyurethane topcoat”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interthane 870 Polyurethane
- System selection for Interthane 870 Polyurethane: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interthane 870 Polyurethane: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interthane 870 Polyurethane: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

