Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Intershield 4000USP Passivating reinforcing primer

Home | All models | Industrial coatings | Intershield 4000USP

Intershield 4000USP Passivating reinforcing primer is supplied under the International Paint brand. It sits in the Industrial coatings range. Technical data list: solids 75% ± 2% · spreading rate 5 m²/L · DFT 100-200 µm (4-8 mil) · density 1.59 kg/L (13.3 lb/US gal). Drying at 25 °C: 30 min touch dry, 2.5 h hard dry.

Basic data

Model
Intershield 4000USP (Passivating reinforcing primer)
Product type
Passivating reinforcing primer
Category
Industrial coatings
Volume solids
75% ± 2%
Theoretical spreading rate
5 m²/L
Recommended dry film thickness
100-200 µm (4-8 mil)
Density (specific gravity)
1.59 kg/L (13.3 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 30 min / Hard dry 2.5 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Intershield 4000USP (Passivating reinforcing primer) data sheet; other conditions are not listed.
Other parameters
For Intershield 4000USP, thinning and pack sizes are as stated in the technical data.

Consumption calculation

Theoretical consumption is 0.200 L/m² for Intershield 4000USP, excluding application losses. That is about 20.0 L per 100 m². At a wet film of 133–267 µm, coverage is 3.14 m² per kg. All figures are calculated.

System and application

Intershield 4000USP as a primer, Surface preparation comes first. Its mixing ratio and pot life are specified in the technical data sheet.

Consumption for Intershield 4000USP is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intershield 4000USP Passivating reinforcing primer”; parameters not listed here are governed by that data sheet.

Enquiries on Intershield 4000USP

  • System selection for Intershield 4000USP: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Intershield 4000USP: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Intershield 4000USP: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.