Industrial coatings
Intershield 300 Abrasion-resistant aluminium-pigmented pure epoxy
Home | All models | Industrial coatings | Intershield 300
Intershield 300 Abrasion-resistant aluminium-pigmented pure epoxy is supplied under the International Paint brand. It sits in the Industrial coatings range. Technical data list: DFT 100-200 µm (4-8 mil), spreading rate 4 m²/L, solids 60% ± 2%, density 1.23 kg/L (10.3 lb/US gal). At 25 °C it is 3 h touch dry and 6 h hard dry.
Basic data
- Model
- Intershield 300 (Abrasion-resistant aluminium-pigmented pure epoxy)
- Product type
- Abrasion-resistant aluminium-pigmented pure epoxy
- Category
- Industrial coatings
- Volume solids
- 60% ± 2%
- Theoretical spreading rate
- 4 m²/L
- Recommended dry film thickness
- 100-200 µm (4-8 mil)
- Density (specific gravity)
- 1.23 kg/L (10.3 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 3 h / Hard dry 6 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intershield 300 (Abrasion-resistant aluminium-pigmented pure epoxy) data sheet; other conditions are not listed.
- Other parameters
- For Intershield 300, thinning and pack sizes are as stated in the technical data.
Consumption calculation
Theoretical consumption is 0.250 L/m² for Intershield 300, excluding application losses. That is about 25.0 L per 100 m². At a wet film of 167–333 µm, coverage is 3.25 m² per kg. All figures are calculated.
System and application
The substrate condition for Intershield 300 has to be checked before application. Its mixing ratio and pot life are specified in the technical data sheet.
Selection and consumption for Intershield 300 are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intershield 300 Abrasion-resistant aluminium-pigmented pure epoxy”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intershield 300
- System selection for Intershield 300: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intershield 300: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intershield 300: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

